Previous Job
Electrical Facilities /Controls Technician
Ref No.: 18-14685
Location: Concord, North Carolina
Title-Electrical Facilities Technician
Location-Concord,NC 28026
Duration-12 Months contract+

NOTE-Experience with electrical power is required. Knowledge of safety standards and codes. Wiring, circuits, breaker panels. Installation and debug,PLC.

Travel requirements for this position will vary based on current project locations. Candidates that are willing to travel to all NC sites (Wilmington, Concord, Winston-Salem, and Hickory) will be given first preference. International travel may be required to support future project needs, but is not a current requirement. Preference will be given to candidates willing to travel internationally.

Monday to Friday 8am-5pm, OT is likely with this position. (Hours will vary with no guarantee of OT, but 10-25hrs per week is not uncommon and expected at times)

General Description


A. Oversee and provide direction to contract engineering techs, internal maintenance, and outside contract trades during all aspects of equipment installation and conversion such as demolition, construction, installation, testing, and debug of production equipment.
B. Perform troubleshooting, process start-up, design, and documentation of Mechanical and Electrical Systems for new or modified production equipment.
C. Interpret and modify existing documentation to complete drawing packages, installation checklists, machine part lists, illustrations, and machine specs of production equipment.
D. Provide direction to technicians to create and modify existing documentation to complete drawing packages, installation checklists, machine part lists, illustrations, and machine specs of production equipment.
E. Provide electrical equipment designs, schematics, and layouts which meet Corning Machine Drafting Standards on CAD based formats. (AutoCAD® 2017, AutoCAD Electrical 2017)

Required Skills/Experience

Ongoing Tasks
A. Interpret and monitor mechanical and electrical installation checklists and schedules. Oversee, as appropriate, the usage of these systems.
B. Procure and expedite materials for new or modified equipment.
C. Specify or recommend vendors, and maintain close liaison between vendor and plant.
D. Re-design electrical systems to reduce installation cost, solve equipment interferences, and correct inadequate designs.
E. Prepare work orders and direct maintenance personnel and outside contract trades in the fabrication, assembly, testing, and installation of equipment.
F. Create, review, and update installation documentation and drawings as required.
G. Direct initial equipment set-up and debug up to the point of turnover to operations.
H. Interface with all departments, as necessary, to ensure efficient use and operation of equipment.
I. Redline existing drawings and follow-up with drafting services or oversee draftsmen as required to resolve design issues.
J. Provide third-level troubleshooting support, directing contract engineering techs, and trades as necessary to replace defective components and execute changes in design solve
equipment/process issues.

Project Tasks:
A. Provide troubleshooting support in assigned areas.
B. Take personal responsibility for all aspects of overseeing equipment installation crews including direction and shift supervision as needed for Electricians and Mechanics during installation activities.
C. Provide training to contract engineering techs, internal maintenance, and outside contract trades on new equipment installation procedures as required for successful execution of installation activities.
D. Analyze and correct equipment installation practices to improve efficiencies, specifically directed toward enhancing installation schedules.
E. Develop cost reduction plans for the improvement of installation projects.
F. Provide sketches or marked-up drawings as dictated by project and evolutionary equipment needs.
G. Complete documentation packages to meet customer requirements.
H. Ensure updated documentation exists in assigned areas.
I. Lead trades to install lighting and receptacle circuits
J. Lead trades to install conduit from breaker panels in the mechanical services rooms

Desired Skills/Experience:

Education required:
Minimum of an AS or AAS in an electrical or controls discipline. BS Electrical Engineering Technology, BS Electrical Engineering is acceptable, but keep in mind this is a TECHNICIAN level role.

Experience required:
Minimum 5 to 10 years' experience

Equipment or software experience preferred:
AutoCAD® 2017, AutoCAD Electrical 2017, Windows7, MS Office suite including Power Point, Excel, Word
PLC and PC based systems, Beckhoff PLC / Motion Control, B-R Control, Automated equipment systems experience

Equipment Used:
A. Personal Computers
B. Fluke Meters, Oscilloscopes, and other electronic test equipment.
C. Equipment used for machine installation activities: conduit cutting/threading/bending, man lifts, label makers, hand tools, etc.
D. Electronic calibration equipment
E. Precision flow calibration
F. Programmable Controllers

Personnel Directed By This Position:
Oversee and provide direction to contract engineering techs, internal maintenance, and outside contract trades during scheduled shifts.

Desired/Required Soft Skills Skill or work style preferred:
A. Ability to work well with varied job requirements.
B. Ability to work well with people essential.
C. Presentation skills highly desirable.
D. Well organized.
E. Ability to handle multiple priorities.
F. Results oriented.

Special requirements (Personal Protective Equipment, Certifications, etc)

Unique or special requirements:
A. Strong practical hands-on electrical aptitude (All positions require time on the floor working on equipment)
B. Electro-mechanical troubleshooting ability, proficient with electrical schematics
C. Motion control knowledge: servo, stepper, DC, AC drives.
D. Process variable understanding: flow, temperature, rate, pressure, level.
E. Thorough understanding of current loops.
F. Serial communication knowledge: RS232 / 485, Ethernet, IEEE-488
G. Machine control knowledge and understands classical control theory
H. Mechanical aptitude
I. Electrical power, wiring, and circuits

Willingness to travel internationally is preferred, but not required for immediate project. Team based in Concord, NC. Subsequent projects may be in other NC locations as well as international. Work on an international team is not guaranteed and specific locations will not be disclosed at this point. However, international locations will vary and may include but are not limited to Europe and Asia. Candidates willingness to work international is a plus, but not required.