Ref No.: 17-00485
Location: novi, Michigan

Hope you are doing well.

Kindly please go through the requirement. Please share me your updated resume if you are comfortable

Location: Novi MI
Contract: 6+ Months

Required Skills, Education & Experience:
Study blueprints, sketches, drawings, manuals, specifications or sample part to determine dimensions and tolerances of finished work-piece, sequence of operations and setup requirements.
Measure, mark and scribe dimensions and reference points on material or work-piece as guides for subsequent machining.
Select, align and secure holding fixtures, cutting tools, attachments, accessories and materials on machines such as mills, lathes, jig borers and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and coolant flow and depth and angle of cut, or enter commands to retrieve, input or edit computerized machine control media. Start and observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls or control media as required. Verify conformance of finished work-piece to specifications. Set up and operate machine on trial run to verify accuracy of machine settings or programmed control data. Fit and assemble parts into complete assembly. Verify dimensions and alignment of assembly. Install machined replacement parts in mechanisms, machines, equipment and test operation of unit to ensure functionality and performance. Develop specifications from general description and draw sketch of part or product to be fabricated. Work with engineers, production personnel, programmers and others to resolve machining or assembly problems. "

Required tools needed from incoming tool makers to all Client sites
1⁄2 Impact
1 LB Ball Peen Hammer
1.5 LB Brass Hammer
10 & 12 Crescent Wrench
12 combination Square
2 Polisher
3/8 & 1⁄2 Air Hand Drill
3/8 & 1⁄2 Ratchets
3/8 & 1⁄2 Torque Wrench with NM
6 Calipers
8 Torpedo Level
De-burring Tool
Drift Punches
Metric Allen Wrenches
Metric Tape Measure
Metric Wrenches
Metric, 3/8, & 1⁄2 Socket Wrenches

Client reserves the right to deny any contractor assigned to work at any facility if the required tools listed above are not brought with them to work the job hired. This will be at the cost of the contract house, not at the cost of client.
Please note: Client will NOT supply any of the tools listed above. Workers must come onsite with the proper tools to handle the job hired to complete.

Thanks & Regards,
Sathish Korapati
Ramsoft Systems Inc
Certified: ISO 9001: 2000, MBE
ERP, BI, EAI, E-Business: "Projects & Staffing”
Tel: 248-530-9224, Fax: 248 354 3626,
"Proudly serving the industry for 22 years”